Heat Shrink Terminals

 

• Improved Mechanical Connection from adhesive adhering to both connector and wire insulation provides higher strain relief and resistance to vibration, abrasion, and corrosion 
  
• Harsh Environment Protection adhesive seal resists water, solvents, and chemical penetration 
  
• V Notches in the barrel provides maximum holding strength and excellent current flow over a wide contact area 
  
• Bending Strength is drastically increased due to barrel to pad gusset transition design 
  

Heat Shrink Butt Connectors

Part Number	Color	Copper Cond. Range	Length	Per Bag/Clam	Per Case
AL-B4A-HS-Q	Red	22-18	1.50	25	250
AL-B4B-HS-Q	Blue	16-14	1.50	25	250
AL-B4C-HS-Q	Yellow	12-10	1.75	25	250

Heat Shrink Ring Terminals

Part Number	Color	Copper Cond. Range	Stud Size	Per Bag/Clam	Per Case
AL-R4A-10-HS-Q	Red	22-18	10	25	250
AL-R4B-10-HS-Q	Blue	16-14	10	25	250
AL-R4B-14-HS-Q	Blue	16-14	1/4	25	250
AL-R4B-56-HS-Q	Blue	16-14	5/16	25	250
AL-R4B-38-HS-Q	Blue	16-14	3/8	25	250
AL-R4C-10-HS-Q	Yellow	12-10	10	25	250
AL-R4C-14-HS-Q	Yellow	12-10	1/4	25	250
AL-R4C-38-HS-Q	Yellow	12-10	3/8	25	250

Heat Shrink Fully Insulated Female Disconnects

Part Number	Color	Copper Cond. Range	Tab Width X Thickness	Per Bag/Clam	Per Case
AL-CFR4NA250F-HS-Q	Red	22-18	.250 X .032	25	250
AL-CFR4NB250F-HS-Q	Blue	16-14	.250 X .032	25	250
AL-CFR4NC250F-HS-C	Yellow	12-10	.250 X .032	25	250

Heat Shrink Fully Insulated Male Disconnects

Part Number	Color	Copper Cond. Range	Tab Width X Thickness	Per Bag/Clam	Per Case
AL-CM4TNA250F-HS-Q	Red	22-18	.250 X .032	25	250
AL-CM4TNB250F-HS-Q	Blue	16-14	.250 X .032	25	250
AL-CM4TNC250F-HS-Q	Yellow	12-10	.250 X .032	25	250

Heat Shrink Spade Terminals

Part Number	Color	Copper Cond. Range	Stud Size	Per Bag/Clam	Per Case
AL-S4A-6-HS-Q	Red	22-18	6	25	250
AL-S4A-8-HS-Q	Red	22-18	8	25	250
AL-S4A-10-HS-Q	Red	22-18	10	25	250
AL-S4B-6-HS-Q	Blue	16-14	6	25	250
AL-S4B-8-HS-Q	Blue	16-14	8	25	250
AL-S4B-10-HS-Q	Blue	16-14	10	25	250
AL-S4C-8-HS-Q	Yellow	12-10	8	25	250
AL-S4C-10-HS-Q	Yellow	12-10	10	25	250